跳至主要内容

Effect of material on crushing equipment efficiency

There are many types of crushers, for example, rubber shredder,wood shredder,metal shredder,tire shredder,etc. Different types of crushers have different uses, but their basic principles of crushing materials are the same. However, in the crushing process, it can be clearly seen that the efficiency of some crushing equipment is relatively faster, the reason is not the new and old of the crushing equipment, but the effect of the broken materials, so the efficiency of the crushing equipment is not necessarily the problem of the crusher itself, and has a close relationship with the nature of the broken material. The impact is as follows:
1,Hardness of materials. The harder the material is, the more difficult it is to break it up and the more severe the wear and tear on the equipment. The crushing speed is slow, of course, the crushing capacity is small, the efficiency will be reduced accordingly.
2, the humidity of the material, that is, the moisture content in the material is large, the material is easy to adhere in the crusher, but also easy to block in the process of feeding, resulting in reduced crushing capacity; And drier material, the impact will be small.
3, after the crushing of the fineness of the material, fineness requirements are high, that is, the requirements of the crushing of the finer the material, the smaller the crushing capacity.
4, Composition of materials: the more fine powder contained in the materials before crushing, the more it will affect the crushing, because these fine powder are easy to adhere to affect the conveying. For the fine powder content should be more than a screen in advance.
5,Viscosity of materials. That is, the greater the viscosity of the material, the easier the adhesion, and the material attached to the crushing equipment, it will affect the progress of the equipment.
6,The better the abrasion resistance of the crushing parts (hammer head, jaw plate), the greater the crushing capacity. If not, the crushing capacity will be affected.
The crusher will have a certain impact on the machinery itself when it is broken, so the machinery needs regular maintenance, inspection and repair, which will reduce the impact of the equipment and increase the service life of the equipment.

Want to know more exciting content, welcome to visit the official website:http://www.sg-shredder.com

评论

此博客中的热门博文

How to Avoid Faults in Aluminum shredder

The main purpose of scrap  aluminum shredder  equipment is to tear all kinds of unqualified scrap iron into smaller pieces for recycling. Reduce the volume of unprocessed raw materials for mixing with other materials. How to avoid equipment failure in daily production of scrap aluminum shredder equipment?   1. Check and clean in time. After work every day, the machine should be cleaned in time. Check screw loosening and abrasion of easily worn parts such as claws, sieves, etc. http://www.sg-shredder.com/News/Industry_News/755.html

What to do if the metal shredder discharges unevenly

 In the course of use, the metal shredder has uneven discharge. Through analysis, Shuguang heavy machinery summarized the following reasons. First of all, because the voltage is unstable, it will affect the stability of the motor, resulting in uneven speed, fast and slow and other problems, which will worsen the uneven discharge. When the feed is uneven, it is easy to block and cause the cavity to become clogged. Fully process unfinished materials. In severe cases, many blockages may cause downtime or increase in motor temperature.  Secondly, the motor is unstable. When the voltage is stable, following the change of the force endured by the transmission, the fixed point of the motor will be displaced and the base screw will be loosened.  Therefore, it is necessary to check whether this part is complete. First, the current professional standards for shredders are not standard, and the supporting shredder blade standards are also complicated. The shredder produced by the s...

How to deal with the heating problem of shredder motor

When we use the motor for a long time, there will be the problem of motor heating. The motor will lack of oil after a long time, which will affect the production efficiency of the whole shredder equipment . If the motor is hot or burnt, there is no way to tear it. How to avoid the phenomenon of motor heating of the shredder? 1. The adjustment of the tension of the V-belt of the shredder equipment, when the V-belt is too tight, the motor bearing heats up, when the V-belt is too loose, the rotation speed decreases, and the V-belt is easy to slide, which all affect the service life. When adjusting the tension of the V-belt, the bolt fixing the motor base can be loosened, and the position of the motor on the slide way can be changed with the adjusting bolt, so that the V-belt can reach the required tightness, and then the fixed bolt can be tightened; 2.After the shredder motor works for a certain period of time, it is necessary to add oil or open the cleaning bearing and refill the file ba...