跳至主要内容

What’s the difference between Raymond mill and high pressure micro powder mill

Raymond mill and high pressure micro powder mill are commonly used milling equipment, mainly used for barite, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement. , phosphate rock, gypsum, glass, bluestone, petroleum coke, chemical raw material insulation materials, etc. Moh hardness is not more than 9.3, humidity less than 6% of non-flammable and explosive minerals, chemicals, construction and other industries more than 280 materials High-fine powder processing. But what is the difference between the two?
1. High pressure micro powder mill is a new type of high-pressure mill developed on the basis of ordinary Raymond mill, so the working principle and process of the two are exactly the same, but the high pressure micro powder mill grinds the remaining in the production process. Others are discharged into the atmosphere after purification, which is less polluting to the environment and more environmentally friendly.
2. When the high-pressure micro-powder is working, under the action of the high-pressure spring and the centrifugal force, the grinding roller is pressed against the grinding ring, and the rolling pressure is 1.2 times higher than that of the Raymond mill under the same conditions, and the output can be increased by 20%-30%;
3. In the production of ordinary Raymond machines, it is prone to unstable production and uneven grinding. high pressure micro powder mill can solve this problem very well. When the grinding roller and the grinding ring reach a certain degree of wear, adjust the length of the high pressure spring to maintain a constant rolling pressure between the grinding roller and the grinding ring, thereby ensuring stable yield and fineness;
4. High pressure micro powder mill is an upgraded product of ordinary micro-grinding, which has stronger competitiveness. In the case of the same yield and fineness, the system consumes only one-third of the energy of ordinary Raymond mills. Moreover, the investment is small and the income is high. In the case of the same yield and fineness, the price is only one-eighth of that of ordinary Raymond mill.

What’s the difference between Raymond mill and high pressure micro powder mill

评论

此博客中的热门博文

What to do if the metal shredder discharges unevenly

 In the course of use, the metal shredder has uneven discharge. Through analysis, Shuguang heavy machinery summarized the following reasons. First of all, because the voltage is unstable, it will affect the stability of the motor, resulting in uneven speed, fast and slow and other problems, which will worsen the uneven discharge. When the feed is uneven, it is easy to block and cause the cavity to become clogged. Fully process unfinished materials. In severe cases, many blockages may cause downtime or increase in motor temperature.  Secondly, the motor is unstable. When the voltage is stable, following the change of the force endured by the transmission, the fixed point of the motor will be displaced and the base screw will be loosened.  Therefore, it is necessary to check whether this part is complete. First, the current professional standards for shredders are not standard, and the supporting shredder blade standards are also complicated. The shredder produced by the s...

How to Avoid Faults in Aluminum shredder

The main purpose of scrap  aluminum shredder  equipment is to tear all kinds of unqualified scrap iron into smaller pieces for recycling. Reduce the volume of unprocessed raw materials for mixing with other materials. How to avoid equipment failure in daily production of scrap aluminum shredder equipment?   1. Check and clean in time. After work every day, the machine should be cleaned in time. Check screw loosening and abrasion of easily worn parts such as claws, sieves, etc. http://www.sg-shredder.com/News/Industry_News/755.html

How to deal with the heating problem of shredder motor

When we use the motor for a long time, there will be the problem of motor heating. The motor will lack of oil after a long time, which will affect the production efficiency of the whole shredder equipment . If the motor is hot or burnt, there is no way to tear it. How to avoid the phenomenon of motor heating of the shredder? 1. The adjustment of the tension of the V-belt of the shredder equipment, when the V-belt is too tight, the motor bearing heats up, when the V-belt is too loose, the rotation speed decreases, and the V-belt is easy to slide, which all affect the service life. When adjusting the tension of the V-belt, the bolt fixing the motor base can be loosened, and the position of the motor on the slide way can be changed with the adjusting bolt, so that the V-belt can reach the required tightness, and then the fixed bolt can be tightened; 2.After the shredder motor works for a certain period of time, it is necessary to add oil or open the cleaning bearing and refill the file ba...