跳至主要内容

How to solve excessive fan vibration of Raymond mill

Contact Person：Mr.Zhao 0086-13523465141
During the grinding process of Raymond machine, there may be problems of one kind or another, and it is necessary for us to do daily maintenance work.

During the operation of the Raymond machine, the fan is also the same component that is subject to wear. Moreover, because of the structural problems of the fan, it is not easy to wipe it clean in daily maintenance, so it also brings a series of problems. The fan has a certain vibration frequency during normal operation, but if the vibration frequency is large, we need to see what is wrong.

First of all, we need to check whether there is a lot of dust on the fan, and then carefully observe whether the wear is unbalanced, and some places are seriously worn, but some places are not seen to be worn. If these two items do not exist, check the anchor bolts to see if they are loose.

The corresponding solution is also very simple. If there is a lot of dust on the fan, it will be cleaned and the degree of wear will be different. The blade with severe wear will be replaced. If the anchor bolt is loose, it can be tightened.

Excessive vibration frequency of the fan is not a big problem. You don't have to worry about the impact on production. You can avoid this problem by doing routine maintenance work.
Click here for more information.

评论

发表评论

此博客中的热门博文

What to do if the metal shredder discharges unevenly

 In the course of use, the metal shredder has uneven discharge. Through analysis, Shuguang heavy machinery summarized the following reasons. First of all, because the voltage is unstable, it will affect the stability of the motor, resulting in uneven speed, fast and slow and other problems, which will worsen the uneven discharge. When the feed is uneven, it is easy to block and cause the cavity to become clogged. Fully process unfinished materials. In severe cases, many blockages may cause downtime or increase in motor temperature.  Secondly, the motor is unstable. When the voltage is stable, following the change of the force endured by the transmission, the fixed point of the motor will be displaced and the base screw will be loosened.  Therefore, it is necessary to check whether this part is complete. First, the current professional standards for shredders are not standard, and the supporting shredder blade standards are also complicated. The shredder produced by the s...
发表评论
阅读全文

How to Avoid Faults in Aluminum shredder

The main purpose of scrap  aluminum shredder  equipment is to tear all kinds of unqualified scrap iron into smaller pieces for recycling. Reduce the volume of unprocessed raw materials for mixing with other materials. How to avoid equipment failure in daily production of scrap aluminum shredder equipment?   1. Check and clean in time. After work every day, the machine should be cleaned in time. Check screw loosening and abrasion of easily worn parts such as claws, sieves, etc. http://www.sg-shredder.com/News/Industry_News/755.html
发表评论
阅读全文

How to deal with the heating problem of shredder motor

When we use the motor for a long time, there will be the problem of motor heating. The motor will lack of oil after a long time, which will affect the production efficiency of the whole shredder equipment . If the motor is hot or burnt, there is no way to tear it. How to avoid the phenomenon of motor heating of the shredder? 1. The adjustment of the tension of the V-belt of the shredder equipment, when the V-belt is too tight, the motor bearing heats up, when the V-belt is too loose, the rotation speed decreases, and the V-belt is easy to slide, which all affect the service life. When adjusting the tension of the V-belt, the bolt fixing the motor base can be loosened, and the position of the motor on the slide way can be changed with the adjusting bolt, so that the V-belt can reach the required tightness, and then the fixed bolt can be tightened; 2.After the shredder motor works for a certain period of time, it is necessary to add oil or open the cleaning bearing and refill the file ba...
发表评论
阅读全文