跳至主要内容

Dry powder mixer machine operating precautions

Contact Person:Mr.Zhao 0086-13523465141
let's take a look at what we should pay attention to during the operation of dry powder mixers
 
(1) First, check the firmness of the machine, see if the parts are tightly connected, and then let the dry powder mixer run for a few minutes. No abnormality can be used for the next step.
 
(2) In the absence of an abnormality, no abnormal noise and other defects are found, and the preparation for feeding can be started.
 
(3) During the use, the machine should be careful not to let the load be too large, so proper feeding is very important, and the user can release according to the amount of material on the machine.
 
(4) If the machine has abnormal vibration or noise, it is necessary to stop and check immediately to see if there is a fault. If the fault is too large, you can't solve it yourself. You can contact the manufacturer to solve it.
 
(5) Remember to keep the dry powder mixer clean after the operation. In this way, when used again, it can avoid the occurrence of blackening, deterioration, and blockage of materials.
 
(6) Managers must be familiar with the technical performance, internal structure and control structure of dry powder mixers. This can effectively prevent malfunctions and ensure safe production.

评论

此博客中的热门博文

How to Avoid Faults in Aluminum shredder

The main purpose of scrap  aluminum shredder  equipment is to tear all kinds of unqualified scrap iron into smaller pieces for recycling. Reduce the volume of unprocessed raw materials for mixing with other materials. How to avoid equipment failure in daily production of scrap aluminum shredder equipment?   1. Check and clean in time. After work every day, the machine should be cleaned in time. Check screw loosening and abrasion of easily worn parts such as claws, sieves, etc. http://www.sg-shredder.com/News/Industry_News/755.html

What to do if the metal shredder discharges unevenly

 In the course of use, the metal shredder has uneven discharge. Through analysis, Shuguang heavy machinery summarized the following reasons. First of all, because the voltage is unstable, it will affect the stability of the motor, resulting in uneven speed, fast and slow and other problems, which will worsen the uneven discharge. When the feed is uneven, it is easy to block and cause the cavity to become clogged. Fully process unfinished materials. In severe cases, many blockages may cause downtime or increase in motor temperature.  Secondly, the motor is unstable. When the voltage is stable, following the change of the force endured by the transmission, the fixed point of the motor will be displaced and the base screw will be loosened.  Therefore, it is necessary to check whether this part is complete. First, the current professional standards for shredders are not standard, and the supporting shredder blade standards are also complicated. The shredder produced by the s...

How to deal with the heating problem of shredder motor

When we use the motor for a long time, there will be the problem of motor heating. The motor will lack of oil after a long time, which will affect the production efficiency of the whole shredder equipment . If the motor is hot or burnt, there is no way to tear it. How to avoid the phenomenon of motor heating of the shredder? 1. The adjustment of the tension of the V-belt of the shredder equipment, when the V-belt is too tight, the motor bearing heats up, when the V-belt is too loose, the rotation speed decreases, and the V-belt is easy to slide, which all affect the service life. When adjusting the tension of the V-belt, the bolt fixing the motor base can be loosened, and the position of the motor on the slide way can be changed with the adjusting bolt, so that the V-belt can reach the required tightness, and then the fixed bolt can be tightened; 2.After the shredder motor works for a certain period of time, it is necessary to add oil or open the cleaning bearing and refill the file ba...