跳至主要内容

How to do the check work of calcium carbonate grinding mill

Contact Person:Mr.Zhao 0086-13523465141
For the calcium carbonate grinding mill, to ensure the ideal production,we need do the check work before the start-up.This inspection is to find out some factors that may cause equipment failure in time to ensure the smooth progress of production. At the time of inspection, there are mainly five aspects. Here is to analyze these aspects.
1. Lubrication
Before the start of the calcium carbonate grinding mill, the lubrication condition is checked to ensure sufficient lubrication. This is the premise to ensure the efficient operation of the equipment. If the lubrication is insufficient, the parts such as the grinding ring and the grinding ring in the equipment will be worn more. 
2. Firmware situation
The calcium carbonate grinding mill has some fasteners, which should be checked before starting the machine, such as bolts. If the bolts that fix the mill to the foundation loosen and are not found in time, then vibration will occur in the production. Such phenomena may even cause the machine to detach from the base, which is not only unfavorable to production, but also extremely harmful to the safety of workers.
3.Conveyor belt situation
The operation of the calcium carbonate grinding mill requires the assistance of the conveyor belt. It needs to be checked before starting the machine. If it is found to be damaged, it should be replaced immediately. If there is oil on the conveyor belt, wipe the oil with a rag.
 4.Protective device
This device is very important for the calcium carbonate grinding mill, and it is related to the safety problems in production. Therefore, it must be checked before starting the machine, and the abnormal phenomena should be solved in time to prevent accidents.
5. Grinding room
 Check the grinding chamber. If there is oil ore or debris, the operator should clean it up to ensure that the machine cavity starts.

http://www.sgzgchina.com/news/show-444.html

评论

此博客中的热门博文

What if the plastic shredder is blocked

Plastic shredder is specially designed to tear up plastics, building templates, wooden pallets and other waste wood, long time to tear up the work, there may be some problems. For example, in the process of production, fast feed, plastic shredder suddenly appeared blocked, what to do? Plastic shredder, congestion is more common problems are basically caused by not timely maintenance, regular cleaning, accumulate over a long period, can jam during production, not only affect the production, can also harm the plastic shredder. This is the reason why the plastic shredder is blocked. Plastic shredder failure requires you to pay attention to in time, if it is found that the shredding machine production, and the same raw material, check the damper is in place and pipes with and without air leakage, etc., the shredding machine jams are common faults, the possibility is there are four: 1: may be the body design problem; 2: the raw material is put in too fast; 3: it is the pipe of the discharg...

Scrap metal shredder

Start up and operation steps of dual shaft shredder

The industrial shredder expert explains the steps of starting the dual shaft shredder: 1. The starting motor of the dual shaft shredder operates under no load. If the technical conditions of each part are normal, it can only operate under load after the rotating speed is normal. 2. During the operation of the dual shaft shredder, there shall be no magnetic jamming and friction sound. 3. The screen shall be installed firmly, sealed, without leakage, and the screen frame shall be fixed tightly. 4. In case of abnormal noise, blocked discharge, overheated bearing or motor during the operation of the dual shaft shredder, stop feeding, stop inspection and troubleshooting. 5. At the end of the work, the crusher and fan can be stopped only after the materials in the machine are completely removed. 6. Safety production must be strictly guaranteed during operation. Do not increase the speed of the dual shaft shredder at will. Check the cotter pin on the pin shaft frequently. If it is excessivel...