跳至主要内容

Calcium carbonate grinding machine discharge use

Contact Person:Mr.Zhao 0086-13523465141
Calcium carbonate is a valuable resource,which is widely used as a building material and an important raw material for many industries. It can be used to produce cement and produce coated grade heavy calcium carbonate products for high-grade papermaking,it can also be used as a filler in the production process of plastics, coatings, etc.

The common processing technology of calcium carbonate is using a special grinding mill to make it into powder. According to the different grinding fineness, the industry is divided into four different specifications: single flight, double flight, three fly, four fly. 

Single fly powder:
It is used to produce anhydrous calcium chloride and is an auxiliary raw material for the production of sodium dichromate. The main raw material for glass and cement production. In addition, it is also used in building materials and poultry feed.

Double fly powder:
It is a raw material for the production of anhydrous calcium chloride and glass, white filler for rubber and paint, and building materials.

Three flying powder:
Used as a filler for plastics, paint putties, paints, plywood and paints.

Four flying powder:
It is used as a filler for wire insulation, a rubber molded product, and a filler for asphalt linoleum.
Shuguang has improved the production of the grinding mill for more than 20 years, and has the technical standards for product selection and forging,the quality of the grinding mill produced is in an advantageous position in the industry.

评论

此博客中的热门博文

What if the plastic shredder is blocked

Plastic shredder is specially designed to tear up plastics, building templates, wooden pallets and other waste wood, long time to tear up the work, there may be some problems. For example, in the process of production, fast feed, plastic shredder suddenly appeared blocked, what to do? Plastic shredder, congestion is more common problems are basically caused by not timely maintenance, regular cleaning, accumulate over a long period, can jam during production, not only affect the production, can also harm the plastic shredder. This is the reason why the plastic shredder is blocked. Plastic shredder failure requires you to pay attention to in time, if it is found that the shredding machine production, and the same raw material, check the damper is in place and pipes with and without air leakage, etc., the shredding machine jams are common faults, the possibility is there are four: 1: may be the body design problem; 2: the raw material is put in too fast; 3: it is the pipe of the discharg...

Scrap metal shredder

Start up and operation steps of dual shaft shredder

The industrial shredder expert explains the steps of starting the dual shaft shredder: 1. The starting motor of the dual shaft shredder operates under no load. If the technical conditions of each part are normal, it can only operate under load after the rotating speed is normal. 2. During the operation of the dual shaft shredder, there shall be no magnetic jamming and friction sound. 3. The screen shall be installed firmly, sealed, without leakage, and the screen frame shall be fixed tightly. 4. In case of abnormal noise, blocked discharge, overheated bearing or motor during the operation of the dual shaft shredder, stop feeding, stop inspection and troubleshooting. 5. At the end of the work, the crusher and fan can be stopped only after the materials in the machine are completely removed. 6. Safety production must be strictly guaranteed during operation. Do not increase the speed of the dual shaft shredder at will. Check the cotter pin on the pin shaft frequently. If it is excessivel...