跳至主要内容

How to maintain the reducer of calcium carbonate grinding mill

Contact Person:Mr.Zhao 0086-13523465141
Calcium carbonate grinding mill machine is a common grinding equipment for grinding calcium carbonate. The speed reducer plays an important role in the operation of the equipment. Then, how to maintain the reducer?

Since many parts inside the reducer are wearing parts, we have to check the reducer regularly. Check whether the internal parts can be worn. If it is found to be worn, it should be changed in time to ensure that the reducer is running normally. Common wearing parts are: gears, oil seals, bearings. Let us introduce each one below.

1. The gear is the central component inside the reducer. When the reducer is working, the gear and the gear mesh with each other to reach the power transmission effect. Since the gear is usually made of 20CRMNTI data, the speed is very high during operation, and the ordinary can reach about 1500 rpm. Under such high speed operation, the gear is very easy to wear. Therefore, we have to thoroughly check the gears of the reducer every once in a while, to find out in time and change it in time.

2. When the reducer is working, it will generate a lot of heat, which will cause the temperature inside the reducer to rise sharply. The oil seal data is usually made of rubber material, which is easy to change under high temperature conditions, which will make the smooth oil ooze out from the oil seal deformation part, which will also affect the use of the reducer. Therefore, we usually need to check the leakage of the smooth oil of the reducer. Once the problem of oil leakage of the reducer is found, change the oil seal in time, and then add a proper amount of smooth oil to ensure the normal operation of the reducer.
3. Bearings are also a common wearing part. Since the reducer is usually operated at a high speed, the bearing is also running at a high speed, which is very easy to form a bearing damage, so we usually have to check the operation of the reducer once it is found that the reducer has an abnormal phenomenon. We must check the bearings in time, if there is damage, we need to change them in time.

评论

此博客中的热门博文

How to Avoid Faults in Aluminum shredder

The main purpose of scrap  aluminum shredder  equipment is to tear all kinds of unqualified scrap iron into smaller pieces for recycling. Reduce the volume of unprocessed raw materials for mixing with other materials. How to avoid equipment failure in daily production of scrap aluminum shredder equipment?   1. Check and clean in time. After work every day, the machine should be cleaned in time. Check screw loosening and abrasion of easily worn parts such as claws, sieves, etc. http://www.sg-shredder.com/News/Industry_News/755.html

What if the plastic shredder is blocked

Plastic shredder is specially designed to tear up plastics, building templates, wooden pallets and other waste wood, long time to tear up the work, there may be some problems. For example, in the process of production, fast feed, plastic shredder suddenly appeared blocked, what to do? Plastic shredder, congestion is more common problems are basically caused by not timely maintenance, regular cleaning, accumulate over a long period, can jam during production, not only affect the production, can also harm the plastic shredder. This is the reason why the plastic shredder is blocked. Plastic shredder failure requires you to pay attention to in time, if it is found that the shredding machine production, and the same raw material, check the damper is in place and pipes with and without air leakage, etc., the shredding machine jams are common faults, the possibility is there are four: 1: may be the body design problem; 2: the raw material is put in too fast; 3: it is the pipe of the discharg...

Scrap metal shredder