跳至主要内容

How to reduce the maintenance cost of the aluminum shredder

Contact Person:Mr.Zhao 0086-13523465141
With the increasing presence of aluminum shredder equipment in the market, how to maintain this equipment after a period of production, and how to reduce the cost of maintenance ,which are the user should know. After all, users have invested a lot of money in the purchase and use of the aluminum shredder equipment, so in order to get more profit, we need to do more to reduce more investment costs. The cost of repairs is also part of our cost.
 
Some users may say that we can not generate maintenance costs. This is impossible. As long as it is mechanical equipment, there will be some problems after using it for a period of time. We need to repair and maintain the equipment. These all require us to spend some money. If we want to reduce the cost in this area, we need to operate the equipment correctly in normal production and use, so that the equipment can reduce unnecessary damage. All we can do is to make the equipment on the original basis and suffer less damage after a long period of use. In order to make our equipment cost less to repair, we must always work harder on the maintenance of the aluminum shredder equipment.
 
Strictly in accordance with the production operations required by the manufacturers of the aluminum shredder, once the equipment has been in the process of using any abnormal conditions, it is necessary to stop the equipment for inspection, for the long-term production of the aluminum shredder equipment.The replacement of each component should be timely, so that the normal use and service life of the shredder can be effectively ensured, and the normal production of the shredder can be guaranteed.

评论

此博客中的热门博文

How to Avoid Faults in Aluminum shredder

The main purpose of scrap  aluminum shredder  equipment is to tear all kinds of unqualified scrap iron into smaller pieces for recycling. Reduce the volume of unprocessed raw materials for mixing with other materials. How to avoid equipment failure in daily production of scrap aluminum shredder equipment?   1. Check and clean in time. After work every day, the machine should be cleaned in time. Check screw loosening and abrasion of easily worn parts such as claws, sieves, etc. http://www.sg-shredder.com/News/Industry_News/755.html

What to do if the metal shredder discharges unevenly

 In the course of use, the metal shredder has uneven discharge. Through analysis, Shuguang heavy machinery summarized the following reasons. First of all, because the voltage is unstable, it will affect the stability of the motor, resulting in uneven speed, fast and slow and other problems, which will worsen the uneven discharge. When the feed is uneven, it is easy to block and cause the cavity to become clogged. Fully process unfinished materials. In severe cases, many blockages may cause downtime or increase in motor temperature.  Secondly, the motor is unstable. When the voltage is stable, following the change of the force endured by the transmission, the fixed point of the motor will be displaced and the base screw will be loosened.  Therefore, it is necessary to check whether this part is complete. First, the current professional standards for shredders are not standard, and the supporting shredder blade standards are also complicated. The shredder produced by the s...

How to deal with the heating problem of shredder motor

When we use the motor for a long time, there will be the problem of motor heating. The motor will lack of oil after a long time, which will affect the production efficiency of the whole shredder equipment . If the motor is hot or burnt, there is no way to tear it. How to avoid the phenomenon of motor heating of the shredder? 1. The adjustment of the tension of the V-belt of the shredder equipment, when the V-belt is too tight, the motor bearing heats up, when the V-belt is too loose, the rotation speed decreases, and the V-belt is easy to slide, which all affect the service life. When adjusting the tension of the V-belt, the bolt fixing the motor base can be loosened, and the position of the motor on the slide way can be changed with the adjusting bolt, so that the V-belt can reach the required tightness, and then the fixed bolt can be tightened; 2.After the shredder motor works for a certain period of time, it is necessary to add oil or open the cleaning bearing and refill the file ba...