跳至主要内容

Workflow and features of aluminum shredder

Contact Person:Mr.Zhao 0086-13523465141
Aluminum shredder equipment with low speed, high torgue operation minimize the noise and power consumption whist high throughput rates. Well, many users don't understand its workflow well,following is about its workflow and features.
 
Aluminum shredder workflow:
We put the raw material into the entrance of the aluminium shredder. The material enters the shredder through the feeding system. Then the blade of the shredder begins to tear, extrude and cut the material. If the cut material meets the requirement, it will be discharged from the sieve hole, and the material that does not meet the requirement will be torn until the required size is reached.
 
Aluminum shredder features:
1. Equipment with the special structure of the extra-thick sheet precision processing, the powerful rotating shaft of the large-angle hexagonal column, and the large diameter and strong input into the hopper, so you can invest in large-scale raw materials with confidence;
2. Designing a unique rotary knife in terms of thickness, shape and arrangement order, with strong shearing force and sharp edge, which can be crushed with high efficiency;
3, low speed operation, low noise, less dust;
4. The cutter is made of special alloy steel, which is durable and durable;
5. The aluminum shredder operates at normal temperature without any chemical additives and will not cause secondary pollution to the environment.

评论

此博客中的热门博文

How to Avoid Faults in Aluminum shredder

The main purpose of scrap  aluminum shredder  equipment is to tear all kinds of unqualified scrap iron into smaller pieces for recycling. Reduce the volume of unprocessed raw materials for mixing with other materials. How to avoid equipment failure in daily production of scrap aluminum shredder equipment?   1. Check and clean in time. After work every day, the machine should be cleaned in time. Check screw loosening and abrasion of easily worn parts such as claws, sieves, etc. http://www.sg-shredder.com/News/Industry_News/755.html

What to do if the metal shredder discharges unevenly

 In the course of use, the metal shredder has uneven discharge. Through analysis, Shuguang heavy machinery summarized the following reasons. First of all, because the voltage is unstable, it will affect the stability of the motor, resulting in uneven speed, fast and slow and other problems, which will worsen the uneven discharge. When the feed is uneven, it is easy to block and cause the cavity to become clogged. Fully process unfinished materials. In severe cases, many blockages may cause downtime or increase in motor temperature.  Secondly, the motor is unstable. When the voltage is stable, following the change of the force endured by the transmission, the fixed point of the motor will be displaced and the base screw will be loosened.  Therefore, it is necessary to check whether this part is complete. First, the current professional standards for shredders are not standard, and the supporting shredder blade standards are also complicated. The shredder produced by the s...

How to deal with the heating problem of shredder motor

When we use the motor for a long time, there will be the problem of motor heating. The motor will lack of oil after a long time, which will affect the production efficiency of the whole shredder equipment . If the motor is hot or burnt, there is no way to tear it. How to avoid the phenomenon of motor heating of the shredder? 1. The adjustment of the tension of the V-belt of the shredder equipment, when the V-belt is too tight, the motor bearing heats up, when the V-belt is too loose, the rotation speed decreases, and the V-belt is easy to slide, which all affect the service life. When adjusting the tension of the V-belt, the bolt fixing the motor base can be loosened, and the position of the motor on the slide way can be changed with the adjusting bolt, so that the V-belt can reach the required tightness, and then the fixed bolt can be tightened; 2.After the shredder motor works for a certain period of time, it is necessary to add oil or open the cleaning bearing and refill the file ba...