Jaw Crusher is a common medium and fine crushing equipment used in various metallurgical, chemical, building materials and hydropower production lines. It is usually used as secondary crushing equipment and will be found through our market feedback. As a long-term crushing device, various problems and wear occur after a period of use. This is a very headache for the customer, so today we will introduce the repair method of the jaw crusher through in-depth understanding.
The production capacity of the jaw crusher is unquestionable. It uses stone rocking techniques to break the material through interaction. In this way, mechanical wear can be effectively reduced and the life of the equipment can be extended, but this is not the case. Suppose we can ignore the wear and tear of our own equipment.
Once put into production, the degree of wear of other components in the crusher must be regularly assessed. Especially when various parts such as bearings wear out, we need to adjust or replace them in time. Special attention should be paid to the wear of the fasteners. Please pay attention to the deformation of the screw, whether it is tightened and whether the position of other fasteners is offset. When replacing consumables, first open the upper frame of the jaw crusher. First, remove the bolt from the waist, open the hex with a wrench, and replace it with a hanger. In addition to wear inspection, critical components must be lubricated to ensure proper use of lubricants and grease.
评论
发表评论