In order to be able to separate iron and aluminum particles in the material, the conveying device arranged by the jaw crusher, the conveying and magnetic separation are combined into one, that is, the discharge conveying device, and the broken material can be used to separate aluminum and iron in the metal.
As long as the gap accurately controls the distance between the cutter head and the liner, the fineness of the material crushed by the jaw crusher can be less than 1 mm, and the uniformity can effectively control the thickness of the spray. Can reach 90%. Jaw crusher can crush iron, tricycle, car shell, briquette, color steel tile, used appliances, iron filings, safe, iron railing, etc.
Specially designed jaw crusher crushing chamber and liner, the material is ground away from the paint on the lining to ensure that there are no impurities or paint. Fan and dust collector, broken materials are separated in the dust collector and fan, and impurities and paint are discharged.
The jaw crusher performs a simple dynamic balance test on the impeller, and the method is very simple. Use an object to support the impeller, push it by hand, and try to rotate it gently. If it does not reach equilibrium, it will stop at a low point and swing left and right. If there is deviation, you can spot weld on the opposite impeller, increase the weight to balance, or use an angle grinder to remove the weld marks of the heavy impeller, and balance can be achieved, which can repair the jaw crusher fan and work normally.
评论
发表评论