跳至主要内容

Daily maintenance methods of metal shredder

The use and promotion of metal shredder in recent two years has been expanding. With the increase of users, the equipment has become a kind of equipment often mentioned in environmental protection equipment. Facing the vast number of users, we will tell you some methods of equipment maintenance, which can effectively bring some benefits to the working efficiency of the equipment, but also reduce some customers Unnecessary loss.

Metal shredder in factory

Daily maintenance method of metal shredder

1. Before starting the metal shredder, it is necessary to strictly check whether the installation of all parts is reasonable and whether the bolts are loose, and gently pull the belt by hand for test run. The purpose of the test run is to see if there is a cartridge case collision. At the same time, we need to check the direction of rotation. For safety production, do not break inflammable and explosive materials.

2. In the process of production, cutting should be kept even to ensure the crushing quality and smooth production. In order to ensure normal operation of shredder, overload of shredder motor is strictly prohibited.

3. At ordinary times, it is not only necessary to check the tightness and looseness of each part, but also to check which parts are easy to be damaged. If the wear is serious, we should replace the parts in time.

4. Because the speed of the metal shredder is very high, in addition to the firm installation, it should also maintain good lubrication, always check to ensure the normal operation of the equipment. In the process of using the shredder,the temperature of shredder bearing shall not exceed 70 ℃. Add grease and high-speed grease to the main bearing of shredder once a week. Oil will be better, and molybdenum disulfide.

We know that the shredder is generally equipped with two motors and two reducers. The reducers are mainly used to bear the impact damage of materials on the bearings during the tearing process of two shafts, which can reduce the damage to the auxiliary equipment of the motor. The second function is to adjust the speed. According to the fixed speed of the motor, the operation of the equipment can be controlled. The reducers are also calculated as the price excluding the shredder blades One of the higher accessories, so we need to carry out regular maintenance work on the reducer to avoid damage.

As a professional shredder manufacturer and supplier, Shuguang Heavy Machinery's double shaft shredder can shred common domestic waste, and has a special production line to treat waste tires into small particles, which are used as raw materials in many fields.Welcome to contact us for more details.
 
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667
标签：

评论

发表评论

此博客中的热门博文

What to do if the metal shredder discharges unevenly

 In the course of use, the metal shredder has uneven discharge. Through analysis, Shuguang heavy machinery summarized the following reasons. First of all, because the voltage is unstable, it will affect the stability of the motor, resulting in uneven speed, fast and slow and other problems, which will worsen the uneven discharge. When the feed is uneven, it is easy to block and cause the cavity to become clogged. Fully process unfinished materials. In severe cases, many blockages may cause downtime or increase in motor temperature.  Secondly, the motor is unstable. When the voltage is stable, following the change of the force endured by the transmission, the fixed point of the motor will be displaced and the base screw will be loosened.  Therefore, it is necessary to check whether this part is complete. First, the current professional standards for shredders are not standard, and the supporting shredder blade standards are also complicated. The shredder produced by the s...
发表评论
阅读全文

How to Avoid Faults in Aluminum shredder

The main purpose of scrap  aluminum shredder  equipment is to tear all kinds of unqualified scrap iron into smaller pieces for recycling. Reduce the volume of unprocessed raw materials for mixing with other materials. How to avoid equipment failure in daily production of scrap aluminum shredder equipment?   1. Check and clean in time. After work every day, the machine should be cleaned in time. Check screw loosening and abrasion of easily worn parts such as claws, sieves, etc. http://www.sg-shredder.com/News/Industry_News/755.html
发表评论
阅读全文

How to deal with the heating problem of shredder motor

When we use the motor for a long time, there will be the problem of motor heating. The motor will lack of oil after a long time, which will affect the production efficiency of the whole shredder equipment . If the motor is hot or burnt, there is no way to tear it. How to avoid the phenomenon of motor heating of the shredder? 1. The adjustment of the tension of the V-belt of the shredder equipment, when the V-belt is too tight, the motor bearing heats up, when the V-belt is too loose, the rotation speed decreases, and the V-belt is easy to slide, which all affect the service life. When adjusting the tension of the V-belt, the bolt fixing the motor base can be loosened, and the position of the motor on the slide way can be changed with the adjusting bolt, so that the V-belt can reach the required tightness, and then the fixed bolt can be tightened; 2.After the shredder motor works for a certain period of time, it is necessary to add oil or open the cleaning bearing and refill the file ba...
发表评论
阅读全文