跳至主要内容

What are the ways to recycle and process waste plastics

Waste plastic resources are very rich, recycling is also very cheap, and equipment investment is small, the production process is very simple, so waste plastic recycling is a huge potential project.

Comprehensive utilization way:

First: recycled particles; using special shredder equipment, pelletizing equipment, etc., waste polyethylene, polypropylene and other plastics can be processed and produced by crushing, cleaning, heating, plasticizing and extrusion molding process to produce the best-selling recycled particles in the market. The daily profit of 1 ton is 300-500 (different prices in different regions)

Second: production of plastic woven bags;

Third: production of waterproof and antifreeze adhesive; based on foamed plastic waste, under special formula and process conditions, production of multi variety and multi-purpose indoor and outdoor building decoration water-resistant adhesive paste series products is an ideal project with less investment, quick effect, competitiveness and energy efficiency to eliminate plastic pollution. Each ton of waste material can produce several tons of finished rubber. Based on 5kg × 200 barrels per ton of small rubber packaging, the comprehensive production cost is about 3000 yuan, and the selling price is about 6000 yuan.

Fourth: preparation of multifunctional resin adhesive. The product has the characteristics of good adhesion, high gloss, strong impact resistance, acid and alkali resistance, with a daily output of 1 ton, a cost of 2300 yuan per ton and a market price of 5000 yuan. In industry, it can be used to produce various FRP products, which can greatly reduce the production cost. In addition, it can also be used to produce waterproof coating, antirust paint, home putty glue and other products, which can replace various glass glue, wood glue and printing glue.

Fifth: the production of aromatic compounds. Japan is developing a new technology of making chemical raw materials from waste plastics. Its award is to heat waste plastics such as PE and PP to 300 ℃, decompose them into carbohydrates, and then add catalysts to synthesize aromatic compounds such as benzene, toluene and xylene. When reacting at 525 ℃, 70% of waste plastics can be converted into useful aromatic substances, which can be used as raw materials for chemicals and pharmaceuticals, fuel improvers for gasoline, etc., and are widely used. The rest can be converted to hydrogen and propane.

评论

发表评论

此博客中的热门博文

What if the plastic shredder is blocked

Plastic shredder is specially designed to tear up plastics, building templates, wooden pallets and other waste wood, long time to tear up the work, there may be some problems. For example, in the process of production, fast feed, plastic shredder suddenly appeared blocked, what to do? Plastic shredder, congestion is more common problems are basically caused by not timely maintenance, regular cleaning, accumulate over a long period, can jam during production, not only affect the production, can also harm the plastic shredder. This is the reason why the plastic shredder is blocked. Plastic shredder failure requires you to pay attention to in time, if it is found that the shredding machine production, and the same raw material, check the damper is in place and pipes with and without air leakage, etc., the shredding machine jams are common faults, the possibility is there are four: 1: may be the body design problem; 2: the raw material is put in too fast; 3: it is the pipe of the discharg...
发表评论
阅读全文

Scrap metal shredder

发表评论
阅读全文

Start up and operation steps of dual shaft shredder

The industrial shredder expert explains the steps of starting the dual shaft shredder: 1. The starting motor of the dual shaft shredder operates under no load. If the technical conditions of each part are normal, it can only operate under load after the rotating speed is normal. 2. During the operation of the dual shaft shredder, there shall be no magnetic jamming and friction sound. 3. The screen shall be installed firmly, sealed, without leakage, and the screen frame shall be fixed tightly. 4. In case of abnormal noise, blocked discharge, overheated bearing or motor during the operation of the dual shaft shredder, stop feeding, stop inspection and troubleshooting. 5. At the end of the work, the crusher and fan can be stopped only after the materials in the machine are completely removed. 6. Safety production must be strictly guaranteed during operation. Do not increase the speed of the dual shaft shredder at will. Check the cotter pin on the pin shaft frequently. If it is excessivel...
发表评论
阅读全文