跳至主要内容

How to increase the service life of dual shaft shredder blades

As an important part of the dual shaft shredder equipment, the service life of the cutter directly affects the performance of the shredder equipment. According to the different materials torn by the shredder equipment, the shredder blades has different shapes and structures. Dual shaft shredder equipment is widely used for shredding wood, PE pipe, plastic bottle, waste copper wire, plastic film, woven bag, paper, circuit board, light and thin metal, medical supplies, waste household appliances, vehicle recycling, domestic waste treatment.


How to increase the life of shredder blade
1. When installing the shredder blade, the nut must be tightened properly. If the blade is too loose, it will slide during rotary cutting. If the blade is too tight, internal damage or deformation will affect the cutting effect.

2. Regularly check the radial runout of the main shaft of the machine, and ensure that the cutter blades of the shredder coincide with each other.

3. Before cutting the shredder blade, the operator must wear protective equipment to check whether the saw protective cover is in good condition.

4. After the installation is stable, the blade of the double shaft shredder shall be idle for 30 seconds, and the cutting shall be started after everything is normal.

5. The alloy cutter head of the dual shaft shredder has a sharp and sensitive blade. Therefore, care must be taken to protect the alloy cutter head from damage during moving, installing and removing the blade.

6. Before installing the shredder blade, the debris on the spindle and flange must be removed. The flange face shall be flat and clean and intersect the shaft vertically.

What are the main factors that affect the service life of shredder tools?
1. The structure of the tool: the cutting clearance between the tools, the angle of the tool, the surface roughness of the tool edge;

2. Raw materials of cutting tools: the content of beneficial alloy elements and harmful alloy elements;

3. Heat treatment of cutter: hardness of cutter and uniformity of hardness on the same surface;

4. Tool rotation speed: the tearing speed of the tool relative to the material;

5. Tearing force of cutter: that is, the power of tearing machine equipment.

As a professional shredder manufacturer and supplier, Shuguang Heavy Machinery's double shaft shredder can shred common domestic waste, and has a special production line to treat waste tires into small particles, which are used as raw materials in many fields.Welcome to contact us for more details.
 
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667
标签：

评论

发表评论

此博客中的热门博文

What to do if the metal shredder discharges unevenly

 In the course of use, the metal shredder has uneven discharge. Through analysis, Shuguang heavy machinery summarized the following reasons. First of all, because the voltage is unstable, it will affect the stability of the motor, resulting in uneven speed, fast and slow and other problems, which will worsen the uneven discharge. When the feed is uneven, it is easy to block and cause the cavity to become clogged. Fully process unfinished materials. In severe cases, many blockages may cause downtime or increase in motor temperature.  Secondly, the motor is unstable. When the voltage is stable, following the change of the force endured by the transmission, the fixed point of the motor will be displaced and the base screw will be loosened.  Therefore, it is necessary to check whether this part is complete. First, the current professional standards for shredders are not standard, and the supporting shredder blade standards are also complicated. The shredder produced by the s...
发表评论
阅读全文

How to Avoid Faults in Aluminum shredder

The main purpose of scrap  aluminum shredder  equipment is to tear all kinds of unqualified scrap iron into smaller pieces for recycling. Reduce the volume of unprocessed raw materials for mixing with other materials. How to avoid equipment failure in daily production of scrap aluminum shredder equipment?   1. Check and clean in time. After work every day, the machine should be cleaned in time. Check screw loosening and abrasion of easily worn parts such as claws, sieves, etc. http://www.sg-shredder.com/News/Industry_News/755.html
发表评论
阅读全文

How to deal with the heating problem of shredder motor

When we use the motor for a long time, there will be the problem of motor heating. The motor will lack of oil after a long time, which will affect the production efficiency of the whole shredder equipment . If the motor is hot or burnt, there is no way to tear it. How to avoid the phenomenon of motor heating of the shredder? 1. The adjustment of the tension of the V-belt of the shredder equipment, when the V-belt is too tight, the motor bearing heats up, when the V-belt is too loose, the rotation speed decreases, and the V-belt is easy to slide, which all affect the service life. When adjusting the tension of the V-belt, the bolt fixing the motor base can be loosened, and the position of the motor on the slide way can be changed with the adjusting bolt, so that the V-belt can reach the required tightness, and then the fixed bolt can be tightened; 2.After the shredder motor works for a certain period of time, it is necessary to add oil or open the cleaning bearing and refill the file ba...
发表评论
阅读全文