跳至主要内容

How to judge the quality of dual shaft shredder blade

1. To see whether the blade of dual shaft shredder can achieve the purpose of energy saving and consumption reduction: most of the time, customers use this blade for production needs. To measure whether the blade quality is good, we need to be able to see whether the blade can bring energy saving and consumption reduction to the actual use.

2. It needs to see whether the burr of the blade of dual shaft shredder has been forged or not: most of the time, whether the blade can be used well depends on the initial forging. If the hair germ of the blade can be forged, it can achieve a more precise combination between steel atoms and increase the wear resistance.

3. It needs to see whether the blade of the dual shaft shredder has been finished: if the product is of better quality, the accuracy and parallelism of the processing equipment are usually within the blade tolerance range.

4. Need to look at the wire cutting process: a lot of times, good quality shredder blades have to go through wire cutting processing, so as to ensure the perpendicularity of plane, knife edge and inner hole.

5. Need to see shredder blade related heat treatment process. The blade with good quality is often tempered, so that the relevant holding time of steel can be achieved, and the hardness will be more uniform.

6. Need to be able to see the accuracy of the relevant grinding equipment: as long as the high-quality shredder blade, its grinding equipment precision is very high, so that in use can achieve good purpose, if the accuracy is not high, there will be errors, when the error is large, it will inevitably affect the normal use.

As a professional shredder manufacturer and supplier, Shuguang Heavy Machinery's double shaft shredder can shred common domestic waste, and has a special production line to treat waste tires into small particles, which are used as raw materials in many fields.Welcome to contact us for more details.
 
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667

评论

发表评论

此博客中的热门博文

What to do if the metal shredder discharges unevenly

 In the course of use, the metal shredder has uneven discharge. Through analysis, Shuguang heavy machinery summarized the following reasons. First of all, because the voltage is unstable, it will affect the stability of the motor, resulting in uneven speed, fast and slow and other problems, which will worsen the uneven discharge. When the feed is uneven, it is easy to block and cause the cavity to become clogged. Fully process unfinished materials. In severe cases, many blockages may cause downtime or increase in motor temperature.  Secondly, the motor is unstable. When the voltage is stable, following the change of the force endured by the transmission, the fixed point of the motor will be displaced and the base screw will be loosened.  Therefore, it is necessary to check whether this part is complete. First, the current professional standards for shredders are not standard, and the supporting shredder blade standards are also complicated. The shredder produced by the s...
发表评论
阅读全文

How to Avoid Faults in Aluminum shredder

The main purpose of scrap  aluminum shredder  equipment is to tear all kinds of unqualified scrap iron into smaller pieces for recycling. Reduce the volume of unprocessed raw materials for mixing with other materials. How to avoid equipment failure in daily production of scrap aluminum shredder equipment?   1. Check and clean in time. After work every day, the machine should be cleaned in time. Check screw loosening and abrasion of easily worn parts such as claws, sieves, etc. http://www.sg-shredder.com/News/Industry_News/755.html
发表评论
阅读全文

How to deal with the heating problem of shredder motor

When we use the motor for a long time, there will be the problem of motor heating. The motor will lack of oil after a long time, which will affect the production efficiency of the whole shredder equipment . If the motor is hot or burnt, there is no way to tear it. How to avoid the phenomenon of motor heating of the shredder? 1. The adjustment of the tension of the V-belt of the shredder equipment, when the V-belt is too tight, the motor bearing heats up, when the V-belt is too loose, the rotation speed decreases, and the V-belt is easy to slide, which all affect the service life. When adjusting the tension of the V-belt, the bolt fixing the motor base can be loosened, and the position of the motor on the slide way can be changed with the adjusting bolt, so that the V-belt can reach the required tightness, and then the fixed bolt can be tightened; 2.After the shredder motor works for a certain period of time, it is necessary to add oil or open the cleaning bearing and refill the file ba...
发表评论
阅读全文