跳至主要内容

Structural qualities of tire shredder

Contact Person：Mr.Zhao 0086-13523465141
The tire shredder is used to reduce the size of the material by shearing, tearing and squeezing, and is the crushing of the waste tires in the early stage of recycling. This article mainly introduces the qualities of its structure.
1. The design of the tire shredder equipment is reasonable, and the machine body is welded by high quality steel.
2. Fastened with high-strength screws, solid structure and durable.
3.The host design is exquisite, the scrap material is separated design, so that the output is higher.
4. The processed pieces are evenly distributed and the loss is small. A variety of screens can be replaced at the same time to meet different needs.
5.At the same time equipped with different materials of the tool, in order to adapt to different materials, the tool can be adjusted telescopically, with blunt after grinding, multiple use, long life.
6. This tire shredder machine has the advantages of advanced structure, beautiful appearance, simple operation, stable operation, low investment and high efficiency.
7.Equipped with an extra large pulley to increase the inertia of the crusher, energy saving and powerful crushing

评论

发表评论

此博客中的热门博文

What if the plastic shredder is blocked

Plastic shredder is specially designed to tear up plastics, building templates, wooden pallets and other waste wood, long time to tear up the work, there may be some problems. For example, in the process of production, fast feed, plastic shredder suddenly appeared blocked, what to do? Plastic shredder, congestion is more common problems are basically caused by not timely maintenance, regular cleaning, accumulate over a long period, can jam during production, not only affect the production, can also harm the plastic shredder. This is the reason why the plastic shredder is blocked. Plastic shredder failure requires you to pay attention to in time, if it is found that the shredding machine production, and the same raw material, check the damper is in place and pipes with and without air leakage, etc., the shredding machine jams are common faults, the possibility is there are four: 1: may be the body design problem; 2: the raw material is put in too fast; 3: it is the pipe of the discharg...
发表评论
阅读全文

Scrap metal shredder

发表评论
阅读全文

Start up and operation steps of dual shaft shredder

The industrial shredder expert explains the steps of starting the dual shaft shredder: 1. The starting motor of the dual shaft shredder operates under no load. If the technical conditions of each part are normal, it can only operate under load after the rotating speed is normal. 2. During the operation of the dual shaft shredder, there shall be no magnetic jamming and friction sound. 3. The screen shall be installed firmly, sealed, without leakage, and the screen frame shall be fixed tightly. 4. In case of abnormal noise, blocked discharge, overheated bearing or motor during the operation of the dual shaft shredder, stop feeding, stop inspection and troubleshooting. 5. At the end of the work, the crusher and fan can be stopped only after the materials in the machine are completely removed. 6. Safety production must be strictly guaranteed during operation. Do not increase the speed of the dual shaft shredder at will. Check the cotter pin on the pin shaft frequently. If it is excessivel...
发表评论
阅读全文