跳至主要内容

Domestic garbage sorter can solve the problem of garbage

The innocuous disposal of domestic waste is a popular project which is of great benefit in the contemporary era. Domestic garbage is piled randomly, old garbage is rampant, incineration garbage is not thorough, construction garbage and domestic garbage are mixed together, and so on. There are endless projects on domestic garbage reprocessing and various treatment methods, but garbage reuse has little effect. How to make the domestic waste construction waste sorted reasonably and reused comprehensively is a thorny problem for environmentalists.
 
Household garbage innocuous treatment production line can be mixed by magnetic iron remover absorption and separation; large pieces of material can be used after automatic sorting and crushing by construction garbage sorter. It can be used to make sand from construction waste and bricks from road construction waste. Under the action of high-pressure airflow, flammable materials such as plastic bags, sawdust and paper towels are separated separately. After being cut and torn by shredder, the inorganic substances are directly dried by spiral dryer and separated. After extrusion, the inorganic substances can be made into granules, which can be used for building plates, packaging materials and fireworks. Combination cylinder and other products.

评论

此博客中的热门博文

What if the plastic shredder is blocked

Plastic shredder is specially designed to tear up plastics, building templates, wooden pallets and other waste wood, long time to tear up the work, there may be some problems. For example, in the process of production, fast feed, plastic shredder suddenly appeared blocked, what to do? Plastic shredder, congestion is more common problems are basically caused by not timely maintenance, regular cleaning, accumulate over a long period, can jam during production, not only affect the production, can also harm the plastic shredder. This is the reason why the plastic shredder is blocked. Plastic shredder failure requires you to pay attention to in time, if it is found that the shredding machine production, and the same raw material, check the damper is in place and pipes with and without air leakage, etc., the shredding machine jams are common faults, the possibility is there are four: 1: may be the body design problem; 2: the raw material is put in too fast; 3: it is the pipe of the discharg...

Scrap metal shredder

Start up and operation steps of dual shaft shredder

The industrial shredder expert explains the steps of starting the dual shaft shredder: 1. The starting motor of the dual shaft shredder operates under no load. If the technical conditions of each part are normal, it can only operate under load after the rotating speed is normal. 2. During the operation of the dual shaft shredder, there shall be no magnetic jamming and friction sound. 3. The screen shall be installed firmly, sealed, without leakage, and the screen frame shall be fixed tightly. 4. In case of abnormal noise, blocked discharge, overheated bearing or motor during the operation of the dual shaft shredder, stop feeding, stop inspection and troubleshooting. 5. At the end of the work, the crusher and fan can be stopped only after the materials in the machine are completely removed. 6. Safety production must be strictly guaranteed during operation. Do not increase the speed of the dual shaft shredder at will. Check the cotter pin on the pin shaft frequently. If it is excessivel...