跳至主要内容

Setting and adjustment of operating parameters of PE500 × 750 jaw crusher

Basic parameters of PE500 × 750 jaw crusher
 
1. Production capacity: adjustable from 34-68m³ per hour. The size of the material inlet is 500mm × 750mm, the feed granularity is 425mm, the discharge opening adjustment range is 50-100mm, the motor power is 55kw, the overall size is 1956 × 1918 × 1920 (unit: mm), and the total weight is 11320kg.
 
2. Structural characteristics of PE500 × 750 jaw breaking products. The jaw crusher is mainly composed of three parts: fixed body, rotating body and adjusting device. It can process all kinds of ore with compressive strength not higher than 320MPa to medium size at one time, and often forms a complete set of sand and gravel production line with cone crusher, impact crusher, sand making machine, etc.

评论

发表评论

此博客中的热门博文

What if the plastic shredder is blocked

Plastic shredder is specially designed to tear up plastics, building templates, wooden pallets and other waste wood, long time to tear up the work, there may be some problems. For example, in the process of production, fast feed, plastic shredder suddenly appeared blocked, what to do? Plastic shredder, congestion is more common problems are basically caused by not timely maintenance, regular cleaning, accumulate over a long period, can jam during production, not only affect the production, can also harm the plastic shredder. This is the reason why the plastic shredder is blocked. Plastic shredder failure requires you to pay attention to in time, if it is found that the shredding machine production, and the same raw material, check the damper is in place and pipes with and without air leakage, etc., the shredding machine jams are common faults, the possibility is there are four: 1: may be the body design problem; 2: the raw material is put in too fast; 3: it is the pipe of the discharg...
发表评论
阅读全文

Scrap metal shredder

发表评论
阅读全文

Start up and operation steps of dual shaft shredder

The industrial shredder expert explains the steps of starting the dual shaft shredder: 1. The starting motor of the dual shaft shredder operates under no load. If the technical conditions of each part are normal, it can only operate under load after the rotating speed is normal. 2. During the operation of the dual shaft shredder, there shall be no magnetic jamming and friction sound. 3. The screen shall be installed firmly, sealed, without leakage, and the screen frame shall be fixed tightly. 4. In case of abnormal noise, blocked discharge, overheated bearing or motor during the operation of the dual shaft shredder, stop feeding, stop inspection and troubleshooting. 5. At the end of the work, the crusher and fan can be stopped only after the materials in the machine are completely removed. 6. Safety production must be strictly guaranteed during operation. Do not increase the speed of the dual shaft shredder at will. Check the cotter pin on the pin shaft frequently. If it is excessivel...
发表评论
阅读全文